To use ION 7550 as a gateway

Discussion in 'AVReporter Questions' started by kovecses.balazs, Jul 26, 2016.

  1. If you would like to use a meter like ION7550 as a gateway, you need to set an IP address in the meter and use the same ip address in Realtime Device manager.

    Step 1: set IP address and slave address on ION7550.
    Step 2: set slave address in Sepam M88
    Step 3: In AVReporter Realtime Device Manager double click to Gateways , add a new gateway with ip address.
    Step 4: Open this new gateway, add an ION7550 meter and a Sepam M88.


Share This Page